Имя компьютера в сети, ip - одинаковые?

Приведите примеры nethasp.ini на клиентах.

;
; NetHASP Configuration file syntax.
;
;
; Note:
;
; All text lines were commented.
; Remove comments in the lines you want to use.
;


[NH_COMMON]

;
; Section-specific Keywords
;

;
; You can set only ONE of the following three Keywords to "Enabled"!
;
;;NH_IPX = Enabled or Disabled ; Use the IPX protocol
;;NH_NETBIOS = Enabled or Disabled; Use the NETBIOS protocol
;;NH_TCPIP = Enabled or Disabled; Use the TCP/IP protocol

;;NH_MACHINE = IBM or NEC; The computer on which the protected
; application is activated.
; Default: IBM

;
; General Keywords
;
;;NH_SESSION = <Num> ; See Adapting the Timeout Length
;;NH_SEND_RCV = <Num> ; in the HASP Programmer's Guide.



[NH_IPX]

;
; Section-specific Keywords for the IPX protocol.
;

;;NH_USE_BINDERY = Enabled or Disabled; Use IPX with bindery.
; Default: Disabled
; Ignored under Win32 API.
; This switch replaces older switch
; named NH_USE_SAP.

;;NH_USE_BROADCAST = Enabled or Disabled; Use IPX Broadcast mechanism.
; Default: Enabled

;;NH_BC_SOCKET_NUM = <Number>; Broadcast socket number (HEX).
; Default: 7483H

;;NH_USE_INT = 2F_NEW or 7A_OLD; 2F_NEW means that IPX protocol will
; use interrupt 2Fh ONLY.
; 7A_OLD means that IPX protocol will
; use interrupt 7Ah ONLY.
; Default: 2F_NEW.

;;NH_SERVER_NAME = <Name1>, <Name2>,..; Communicate with the NetHASP
; Server with the specified name.
; Maximum: 6 names, up to 7
; case-insensitive characters each.

;;NH_SEARCH_METHOD = Localnet or Internet; See Local Networks and
; Internetworks in the HASP
; Programmer's Guide.

;;NH_DATFILE_PATH = <path>; Specify the location of the NetHASP
; License Manager's address file.

;
; General Keywords
;
;;NH_SESSION = <Num> ; See Adapting the Timeout Length
;;NH_SEND_RCV = <Num> ; in the HASP Programmer's Guide.


[NH_NETBIOS]

;
; Section-specific Keywords for the NetBIOS protocol.
;
;;NH_NBNAME = <Name> ; Assign a name to the NetHASP
; License Manager.
; 1 name possible, up to 8
; case-insensitive characters.

;;NH_USELANANUM = <Num> ; Assign a lana number to be used
; as a communication channel.
;
; General Keywords
;
;;NH_SESSION = <Num> ; See Adapting the Timeout Length
;;NH_SEND_RCV = <Num> ; in the HASP Programmer's Guide.


[NH_TCPIP]

;
; NetHASP does not support TCP/IP under DOS.
;

;
; Section-specific Keywords for the TCP/IP protocol.
;

;;NH_SERVER_ADDR = <Addr1>, <Addr2>; IP addresses of all the NetHASP
; License Managers you want to search.
; Unlimited addresses and multiple
; lines are possible.
;
; Possible address format examples:
; IP address: 192.114.176.65
; Local Hostname: ftp.aladdin.co.il

;;NH_PORT_NUMBER = <Num>; Set the TCP/IP port number. This is
; optional. The default number is 475.


;;NH_TCPIP_METHOD = TCP or UDP; Send a TCP packet or UDP packet
; Default: UDP
;;NH_USE_BROADCAST = Enabled or Disabled; Use TCPI/IP Broadcast mechanism.
; Default: Enabled

;;NH_SERVER_NAME = <Name1>, <Name2>,; Communicate with the NetHASP
; Server with the specified name.
; Maximum: 6 names, up to 7
; case-insensitive characters each.

;
; General Keywords.
;
;;NH_SESSION = <Num> ; See Adapting the Timeout Length
;;NH_SEND_RCV = <Num> ; in the HASP Programmer's Guide.

...
NH_IPX = Disabled ; Use the IPX protocol
NH_NETBIOS = Disabled ; Use the NETBIOS protocol
NH_TCPIP = Enabled ; Use the TCP/IP protocol
...
NH_SERVER_ADDR = 192.168.6.65
...
NH_TCPIP_METHOD = TCP ; Send a TCP packet or UDP packet
; Default: UDP
NH_USE_BROADCAST = Disabled ; Use TCPI/IP Broadcast mechanism.
; Default: Enabled
...

yurik1987, что это у вас все закомментировано?

Вот выдержка из моего NETHASP.INI, приведены только раскомментированные (действующие) строки:

Обратите внимание на NH_SERVER_ADDR: должен быть указан реальный адрес машины с ключом HASP.